> ## Knowledge Base Index
> Fetch the complete knowledge base index at: https://support.eatos.com/sitemap.xml
> Use this file to discover available pages before exploring further.
> Pure-Markdown content can be obtained by appending a '.md' suffix to the content URLs listed in the sitemap (without the trailing slash).

# Card Reader & Cash Drawer


### Introduction

This guide will walk you through the process of setting up your Card Reader and Cash Drawer on the POP system. Properly configuring these components ensures seamless transactions and efficient cash management. Follow the steps below to get started:  

### Table of Contents

* [Configuring Card Reader and Cash Drawer on POP](#3-configuring-card-reader-and-cash-drawer-on-pop)
---

### Configuring Card Reader and Cash Drawer on POP

**Step 1:** Launch the **POP** application on your system.

**Step 2:** Select the burger icon on the order screen.

![](https://storage.crisp.chat/users/helpdesk/website/74260be74e639800/image_j9tamp.png)

**Step 3:** Then tap on the **Settings** tab from the options

![](https://storage.crisp.chat/users/helpdesk/website/74260be74e639800/image_16jsb96.png)

**Step 4:** Select on the **"Hardware"** 

![](https://storage.crisp.chat/users/helpdesk/website/74260be74e639800/image_xhnphx.png)

**Step 5:** Select **"Card Reader."**

![](https://storage.crisp.chat/users/helpdesk/website/74260be74e639800/image_53qhjh.png)

**Step 6:** **Detect Card Reader** -  
 
This function allows the system to identify and establish a connection with the card reader.

![](https://storage.crisp.chat/users/helpdesk/website/74260be74e639800/image_1wkxgkz.png)

**Step 7:** **Select Card Reader** -  

Use this option to add a new card reader to the system. Follow the prompts to complete the setup.

![](https://storage.crisp.chat/users/helpdesk/website/74260be74e639800/image_1kvtq5o.png)
---

To configure the **Cash Drawer**, return to the **"Hardware"** section in the **"Settings"** tab.

**Step 1:** Choose **"Cash Drawer"** from the available options.

![](https://storage.crisp.chat/users/helpdesk/website/74260be74e639800/image_17ybd5p.png)

**Step 2:** On the **"Cash Drawer"** page, you'll see details about the currently paired cash register. Here are the options available:

 **Step 3:** **Add New Cash Register**: If you need to set up an additional cash drawer, use this option to initiate the process.

![](https://storage.crisp.chat/users/helpdesk/website/74260be74e639800/image_1hb2oet.png)

By following these steps, you'll be able to efficiently configure your Card Reader and Cash Drawer settings on the POP system. The proper configuration ensures accurate transactions and helps streamline your point-of-sale operations. If you encounter any issues during the setup process or have further questions, don't hesitate to reach out to our support team for assistance. 

[Back to top](#3-introduction)