> ## Knowledge Base Index
> Fetch the complete knowledge base index at: https://support.eatos.com/sitemap.xml
> Use this file to discover available pages before exploring further.
> Pure-Markdown content can be obtained by appending a '.md' suffix to the content URLs listed in the sitemap (without the trailing slash).

# Fixing Disconnections & Detection Issues


### Introduction

Troubleshooting Guide: Resolving Printer Disconnection and Detection Issues

Struggling with printer connectivity and detection issues? This comprehensive guide is your go-to resource for troubleshooting and resolving these issues step by step. Simply follow the instructions below to swiftly restore your printer to peak performance.

### Table of Contents

* [ **Steps to Resolve Connectivity Issues with eatOS Printers** ](#3steps-to-resolve-connectivity-issues-with-eatos-printers) 

---

### Steps to Resolve Connectivity Issues with eatOS Printers

**Step 1: Verify Printer Status** 

**Blinking Red Light:** First, confirm whether the red light on your printer is blinking. If it is, proceed to the subsequent steps for troubleshooting.

**Step 2: Perform Basic Checks** 

**Paper Roll:** Ensure that the paper roll is inserted correctly and that the compartment is securely closed.
Connections: Double-check the connection of the USB, Ethernet, or RJ-11 cable to the printer. Make sure they are properly connected.

**Step 3: Check Printer Detectability**  

**Printer Detection:** Verify whether the printer is detectable. Access the advanced settings for your eatOS Printer.

**Step 4: Test Default Receipt Printing** 

**Test Receipt Printer:** If the printer is detectable, move on to testing the default receipt printer. Perform tasks like firing orders and printing receipts.

**Step 5: Perform a Printer Reset** 

**Feed Button Reset:** If the printer remains undetectable, turn off the device. While turning it back on, press and hold the feed button for 3-5 seconds. Allow two sheets of paper to print.

**Step 6: Check IP Address** 

**IP Address Detection:** Examine the second printout for an IP address located at the bottom.

**Step 7: IP Address Detected** 

**Test Print:** If an IP address is detected on the second printout, proceed to test print operations.

**Step 8: IP Address Not Detected**  

**Retry Printer Reboot:** If the IP address is not present on the second attempt, perform another printer reboot.

**Local Network Issue:** If the IP address is still not detected after the second reboot, it indicates a potential local network connectivity problem on-site. Address the network issue to restore proper printer functionality.

By diligently following these steps, you can effectively troubleshoot and resolve disconnection and detection problems affecting your printer. Should you continue to experience persistent issues or require further assistance, do not hesitate to contact our dedicated support team. 

[Back to top](#3-introduction)