> ## Knowledge Base Index
> Fetch the complete knowledge base index at: https://support.eatos.com/sitemap.xml
> Use this file to discover available pages before exploring further.
> Pure-Markdown content can be obtained by appending a '.md' suffix to the content URLs listed in the sitemap (without the trailing slash).

# Setting up N950

### Introduction

This Article will review the necessary steps to help you set up and navigate your new N950 device.

The **N950** is a cutting-edge Android SmartPOS terminal that enhances business operations with its advanced features and sleek design.

![](https://storage.crisp.chat/users/helpdesk/website/-/7/4/2/6/74260be74e639800/f9b30afd574d139f236f6e0b4c9e90_1x2rds.jpg)

### Table of Contents

* [Hardware & Terminal Components](#3-hardware-&-terminal-components)
* [Basic Operations and Getting Started](#3-basic-operations-and-getting-started)
* [Battery](#3-battery)
* [Operating the terminal](#3-operating-the-terminal)


---

### Hardware & Terminal Components

### 1.1 Content of Package

* Payment Terminal with a pre-installed 4G SIM Card
* Payment terminal battery (attached to the terminal)
* Power cord USB-C
* Receipt Roll

### 1.2 Components of the N950 Payment Terminal

![](https://storage.crisp.chat/users/helpdesk/website/-/7/4/2/6/74260be74e639800/screenshot-2025-03-26-at-34145_i1rxpn.png =900x500)

### Basic Operations and Getting Started

### 2.1 Main Applications & Home view

The terminal comes with the following pre-configured applications. 

![](https://storage.crisp.chat/users/helpdesk/website/-/7/4/2/6/74260be74e639800/screenshot-2025-03-26-at-35151_1gpdlnr.png)

**Npay app**
* Npay is a payment service of Nets & Next Group.

**Terminal App**
* The Terminal app allows you to collect payments securely and swiftly. Purchase receipts are also printed through the application.

**Transactions app**
* All transactions made on the terminal within a time window of 30 days are gathered in the **Transactions app**. Here you can revisit your payments, re-print receipts, make refunds, cancel payments, and more.


### Battery

### 3.1 Charging the battery

Before using the terminal, charge the battery well. Place the terminal in the charging base and keep the base connected to a power supply when it is not being operated. Alternatively, insert the USB cable into the USB-C slot and connect the power cord to a power supply.

![](https://storage.crisp.chat/users/helpdesk/website/-/7/4/2/6/74260be74e639800/screenshot-2025-03-26-at-40218_2n9u1e.png)

### 3.2 Installing the receipt paper

1. Open the paper roll cover

![](https://storage.crisp.chat/users/helpdesk/website/-/7/4/2/6/74260be74e639800/screenshot-2025-03-26-at-41026_h4p4rm.png)

2. Insert the paper roll in the compartment following the directions shown in the picture.

![](https://storage.crisp.chat/users/helpdesk/website/-/7/4/2/6/74260be74e639800/screenshot-2025-03-26-at-41034_16jaa74.png)

3. Pull 5 cm of the paper until it protrudes from the compartment on the top of the terminal

![](https://storage.crisp.chat/users/helpdesk/website/-/7/4/2/6/74260be74e639800/screenshot-2025-03-26-at-41041_11yn141.png)

4. Close the compartment lid (an audible 'click' should be heard).

![](https://storage.crisp.chat/users/helpdesk/website/-/7/4/2/6/74260be74e639800/screenshot-2025-03-26-at-41047_auxr2p.png)

5. Remove the excessive paper by tearing along the serrated edge.

![](https://storage.crisp.chat/users/helpdesk/website/-/7/4/2/6/74260be74e639800/screenshot-2025-03-26-at-41054_lleo1b.png)

### Operating the terminal

### 4.1. Power On:

* Press the power button on the left-hand side of the terminal for about 2 seconds until the LCD (screen) is lit and the terminal switches on. The terminal will begin to automatically check for any software updates.

### 4.2. Setting up the terminal

* The terminal will begin to set up all your needed smart terminal configurations when it is started. Once the terminal is set up and paired with your business, please choose a user and a passcode for logging in. When operating the terminal for the first time, please agree to the terms on the screen.

### 4.3. Power off/ reboot

* Press and hold the power button until a pop-up window appears on the terminal screen. In the window, touch the screen to select **'power off / 'reboot',** depending on your selection.

|| Note: In case the terminal is crashing, please press the home button for about 10 seconds to force reboot the terminal.

### 4.4 Wi-Fi

* Configuring Wi-Fi on the N950 device is done when setting the terminal up (when powering on).
You will access the Wi-Fi settings after the language is chosen, and you will see a list of available networks on the device screen in the ‘Connect Wi-Fi’ list.
If you need to re-access the Wi-Fi settings, navigate to the device settings and from here to the Wi-Fi section.


### Turn On Wi-Fi

1. Access Settings:

• Look for the **“Settings”** application (represented by a gear icon) on the home screen.
• Navigate to **Network Settings**
• You can manage the Wi-Fi settings under ‘Preferences'.
• Within the Network Settings menu, manage Wi-Fi settings.
• If Wi-Fi is not already enabled, turn it on
• Enable Wi-Fi through the toggle/switch.

2. Select the WI-FI

• Once the Wi-Fi is turned on, you should see a list of available Wi-Fi networks. 
• Select the network you want to connect to and add the password if the network is secured.
• When tapping on the ‘Network details’, you can see additional information about the connection (strength, IP address, MAC address, etc.)

3. Enter Wi-Fi Password:

If the selected Wi-Fi network is secured, you will be prompted to enter the password. Use the on-screen keyboard to input the Wi-Fi password.