Setting up N950

Introduction

This Article will review the necessary steps to help you set up and navigate your new N950 device.

The N950 is a cutting-edge Android SmartPOS terminal designed to enhance business operations with its advanced features and sleek design.

Table of Contents

Hardware & Terminal Components
Basic Operations and getting started
Battery
Operating the terminal

Hardware & Terminal Components

1.1 Content of Package

Payment Terminal with a pre-installed 4G SIM Card
Payment terminal battery (attached to the terminal)
Power cord USB-C
Receipt Roll

1.2 Components of the N950 Payment Terminal

Basic Operations and getting started

2.1 Main Applications & Home view

The terminal comes with the following pre-configured applications.



Npay app
Npay is a payment of Nets & Next Group.

Terminal App
The Terminal app allows you to collect payments securely and swiftly. Purchase receipts are also printed through the application.

Transactions app
All transactions made on the terminal between a time window of 30 days are gathered in the Transactions app. Here you can revisit your payments, re-print receipts, make refunds, cancel payments, and more.

Battery

3.1 Charging the battery

Before using the terminal, charge the battery well. Place the terminal in the charging base and keep the base connected to a power supply when it is not being operated. Alternatively, insert the USB cable into the USB-C slot and connect the power chords to a power supply.

3.2 Installing the receipt paper

Open the paper roll cover


Insert the paper roll in the compartment following the directions shown in the picture.


Pull 5 cm of the paper until it protrudes from the compartment on the top of the terminal


Close the compartment lid (an audible 'click' should be heard).


Remove the excessive paper by tearing along the serrated edge.

Operating the terminal

4.1. Power On:

Press the power button on the left-hand side of the terminal for about 2 seconds until the LCD (screen) is lit and the terminal switches on. The terminal will begin to automatically check for any software updates.

4.2. Setting up the terminal

The terminal will begin to set up all your needed smart terminal configurations when it is started. Once the terminal is set up and paired with your business, please choose a user and a passcode for logging in. When operating the terminal for the first time, please agree to the terms on the screen.

4.3. Power off/ reboot

Press and hold the power button uni=til a pop-up window appears on the terminal screen. In the window, touch the screen to select 'power off / 'reboot' depending on your selection.
Note: In case of the terminal crashing, please press the home button for about 10 seconds to force reboot the terminal.

4.4 Wi -Fi

Configuring Wi-Fi on the N950 device is done when setting the terminal up (when powering on).
You will access the Wi-Fi settings after that the language is chosen and will see a list of available networks on the device
screen in the ‘Connect Wi-Fi’ list.
If you need to re-access the Wi-Fi settings, navigate to the device settings and from here to the Wi-Fi section.

Turn On Wi-Fi

Access Settings:

• Look for the “Settings” application (represented by a gear icon) on the home screen.
• Navigate to Network Settings
• You can manage the Wi-Fi settings under ‘preferences.
• Within the Network settings menu manage Wi-Fi settings.
• If Wi-Fi is not already enabled, turn it on
• Enable Wi-Fi through the toggle/switch.

Select the WI-FI

• Once the Wi-Fi is turned on, you should see a list of available Wi-Fi networks.
• Select the network you want to connect to and add the password if the network is secured.
• When tapping on the ‘Network details’, you can see additional information about the connection (strength; IP address;
MAC address, etc.)

Enter Wi-Fi Password:

If the selected Wi-Fi network is secured, you will be prompted to enter the password. Use the on-screen keyboard to input the Wi-Fi password.

Updated on: 03/27/2025