How to add Adyen Card Reader into Your Dashboard

Introduction

This article outlines the steps required to successfully add your new card reader to the eatOS dashboard, enabling you to start processing payments efficiently.

Adding a New Card reader from the hardware list

On the Left-Hand side, click on Hardware

Next, click on +New Hardware

Select Card Reader

Enter the required information:

Note: For the name, we recommend you use an abbreviation connected to your restaurant name, followed by the device type, and entering the last 4 digits of the SN. Look at the image below for reference

Name
Subtype - (Select Adyen)
POIID - The format should look as follows (P400Plus-DEVICE SN)

Lastly click on Add to save your changes

Once you have successfully added the card reader to the dashboard, log in to the POS system and navigate to the settings to ensure that the newly added card reader is selected.

Updated on: 05/03/2025

Was this article helpful?

Thank you!